Description
Laing Spa Circulation Water Pump. SEND A PHOTO OF THE PLUG ON THE PUMP YOU ARE REPLACING ” USE THIS LINK”
- Used in many spas & hot tubs since the mid 1990’s, such as Sundance Spas, Sweetwater Spas, Dimension One Spas, Hot Spring Spas, Southwest Spas, Sierra Spas, Heritage Spas, Lanark Spas and many others Super cheap to run – 70w power consumption 60 lpm (15 gpm) flow maximum, 6.5m head maximum (double the flow of the older SM959 model) 3/4″ barb connections E10-NSHN2W 230v, 0.3A, 65w, 50/60Hz, 3200 rpm, less than 40 db noise level
- Use of existing original pump cord may be required if we don’t have plug type needed. Full Australian prescribed arcticle approval no. ESV120606 for use in any spa application – filtration / heating or 24 hr ozone systems. Warranty covers manufacturing defects for a period of 12 months from date of sale when used with fresh water spa applications only. This pump is NOT to be used in salt water applications including marine. Ensure the pump is installed horizontal or vertical with wetend up – do not install on angles with wet end dipping downward This hard to obtain Laing pump is used on ozone injecting or slow water circulation to spa heating, this low running cost water pump can run 24 hours keeping the spa water always hot or warm.
