Description
Gas Spa controller Heaters With Electrical Ignition 10A Plug.
IF YOU NEED ANY INFORMATION ON THIS OR ANY OTHER CONTROLLER PLEASE EMAIL THROUGH THIS LINK
PART DESCRIPTION.
- Suits gas spa heaters with pilot light or electronic ignition instantaneous HW 10A plug (including models from Bosch) Spa gas controller with double airswitch and timeclock for full spa system and temperature control 10A supply – 3 x 10A outlets – Pump, Blower and Gas Heater Ignition control system. Maximum load – 10A..
- Spa Bosh Gas Heater Controller Has Timer, Duel Air Switch HIGH LIMIT Temperature Sensor, No Solenoid.
- With the addition of two air operated switches,.
- One for control of the spa pump which is interlocked with the heater circuit and a second one for an auxiliary piece of equipment such as a blower or a light etc,.
- Also a 24 Hr clock controls the pump for a pre-set time for filtration or pre-heating requirements.
This device is used for manual operation of the spa from an Air Button: when the pump is turned on the unit will allow the heater to come on if heat is required up to a maximum user pre-set temperature of 40°C.. - In addition to this user adjustable control the unit also provides HIGH LIMIT protection at 45°C, when correctly installed, by removing power to the spa pump if an over temperature situation occurs.
- Whats in the box:
- Gas Spa controller Heaters With Electrical Ignition 10A Plug.
- With Out Solenoid
- With Solenoid