AsconPool Booster Pump Time Controller MV3-PST

Pressure Cleaner/Booster Pump.

OPERATION.

• • The Multi Vaktrol is designed to give the user trouble free, low maintenance control of the cleaning pump. The Multi Vaktrol unit is designed to be set up and left. Once set up the Multi Vaktrol will turn on each day 15 min after power is supplied to the filter pump and run for the user selected time. Time remaining for the controllers operation is indicated by that hour light flashing.

FLOW SWITCH OVERRIDE.

• • There is a two way connector, which is used to plug in the flow switch. The unit operates as normal if the jumper is placed across the two pins. If the flow switch is connected instead the jumper, it then overrides the controller for turning on the power to the pump in order to protect it when there is no water flowing in the pipe.

    .

+ AND – BUTTONS.

• • These buttons allow the user to select between 1 and 5 hours for the cleaning pump to run.

OVERRIDE ON.

• • This button allows the user to run the Multi Vaktrol for extra time for either 1 or 4 hours. The override will then time out after the 1 or 4 hours and turn off automatically. Override on 1 hour selection is displayed by the pump light being lit up, the override on light lit up and the 1 hour light flashing. The 4 hour override is displayed by the pump light lit up, the override light lit up and the 4 hour lights lit up (the current hour the unit is in will be flashing). To select 1 hour just press the button till the override light is lit. To select 4 hours hold the button until the override led is lit and the 4 hour lights are lit.

    .

OVERRIDE OFF.

• The override button turns the Multi Vaktrol off for just 1 hour and then times out and continues normal operation again. This is selected by pressing the override button until the override off light is lit..

Whats in the box:

ASCON MV3.